Here another terminal in tube light is directly connected to the ac supply to ionize the mercury atoms in the tube light starter element is used after the ionization operation of starter is does not need for fluorescent lamp.

Tube light choke connection.

This principle of the choke is exploited in lighting a fluorescent tube light. When an ac voltage is applied to a tube light fixture the voltage passes through the choke the starter and the filaments of the tube. Let see the purpose of electrical chokes in these lights. The ballast employed to convert the ac supply frequency to high frequency and the ballast regulates the supply given to the tube light. Purpose of chokes in tube light. The filaments light up and instantly warm up the tube.

The filament light up and instantly warm up the tube the starter is made up of a discharge bulb with two electrodes next to it when electricity passes through it. I e electrical choke is mostly used in mercury vapor lights sodium vapor lights tube light fitting cfl bulbs compact florescent lights etc. Now there is no change of supply causes choke voltage normalized and act as. The starter is made up of a discharbe bulb with two electrodes next to it. Once the current passes through the tube the starter circuit will be out of part. This volt will capable of to break the electrons inside the tube to make electron flow.

Here two tube lights are used in our case each one is 20 watts each tube light will have two filament with four terminals connect starter element to any on side of tube light after that link phase line to the ballast choke through switch. When supply is provided the starter will interrupt the supply cycle of ac. Finally bring neutral terminal from tube light 2. Due to the sudden change of supply the chock will generate around 1000volts. Check my new video https youtu be eqnenms wrk share this video. In this video i will show you fluorescent tube light wiring connection and also provide circuit diagram of connection.

I have shown tube light connection without starter i. Connect the other terminal of ballast to terminal of first tube light then connect tube light 2 with first one serially as show in the illustration. Here we don t need to have starter. Get to know how to repair fluorescent tube light when electronic ballast choke repair or giving noise. Electrical choke is nothing but an inductor which is connected in series with vapor lights. Electronic ballast choke tube light wiring is simple as normal tube light or it is even simple.

This creates light however the heat from the bulb causes. When electricity passes through it an electrical arc is created between the two electrodes. Get more great videos subscribe h. A choke is connected in one end of the tube light and a starter is in series with the circuit. Find more details https goo gl 62f9py circuit schematics and the source code here.